screw conveyor,feeder machine

screw conveyor,feeder machine

Introduction of Product:

Features of Conveyor
1.Humanized design with easy disassembly, product contact part can be separated for cleaning without tools, leaving no corner, particularly suitable for food field. Time and energy saving, it takes one man only one minute to complete the whole dismantlement without tools, much more safe and efficient.
2.Arch broken device in hopper to help you solve bridge issue.
3.Upgrade components: Polished screw, Semi-open tube.
4.Besides standard type for your choice, it also can be customized based on your requirements.

We're here to help: Easy ways to get the answers you need.

Share with :


LS series Screw Conveyors made ISO9001 standard, design and manufacture accord

with ZBJ81005.1 ~ 2-88 LS screw conveyor professional standards. Type LS screw

conveyor diameter from 100 mm to 1250 mm, a total of 12 kinds of specifications, can

be divided into single and double drive two forms, single drive screw machine

maximum length can reach 40 m (oversize 30 m), double drive screw machine with

middle shaft structure, the maximum length of 80 m (oversize 60 m), every 0.5 m a spiral

captain degrees, can be selected according to need, bearing, the tail bearing under the

external screw head department to reduce the dust of the invasion of the bearing

chamber improves the service life of screw machine key-module. Suspension bearing

adopts rolling, sliding interchangeable among two kinds of structure,small resistance,

sealing strong, good wear resistance. Sliding bearing shell powder metallurgy, nylon

and babbitt and so on the many kinds of material selection for user according to

different occasions. Lateral suspension bearing machine type oil cup, to facilitate

centralized lubrication. Front-rear mouth position arranged flexibly, and adding type

electric discharging mouth, convenient automatic control, can also according to user

requirements, speed alarm device.


LS screw machine has been widely used in various departments of the national economy, such as building material, metallurgy, chemical industry, electric power, coal, machinery, light industry, food and the food industry, is suitable for conveying powder, granulated and small lump materials, such as cement, coal, grain, chemical fertilizer, ash, sand, coke, etc. Should not be transporting perishable materials, big viscosity, easy to agglomerate, LS screw conveyor working environment temperature is usually - 20 ~ 40 ?, the temperature of the conveying material is commonly - 20 ~ 80 ?, the LS screw conveyor is suitable for level and layout of the small Angle, inclination Angle with no more than 15 ° advisable, such as Angle is too large, please choose GX series screw conveyor.

Concrete screw conveyor technology parameters:



Technical Characters for Screw Conveyor

1) Using High Quality Steel Pipes, Excellent Ensemble Rigidity.

2) Double Knot Blades Design which Reduce the Compressing Degree of Materials during Conveying

3) Using Heavy Duty Design High Performance Speed Reducer Box which is Featured with Large Torque and Low Noise

4) Optional Universal Ball Connectors to Facilitate the Direction Change during Installation and Commissioning Process

5) Equipped With High Quality and Easy for Installation Middle Bearing and Rear Bearings

6) One Time Thorough Formed Screw Leaf, Double Knot Design, No Materials Blocking


1.Before-sale services:

We guide customers to choose the best applicable device type and provide the advanced, energy-saving and practical technological process, and also we are responsible for the site planning and design.

2.On-sale services:

Products must be inspected strictly before sell, customers are invited to simulate and test machine on-the -spot and raise objections. We will organize delivery according to the clauses stipulated in the contract.

3.After-sale services:

Our company will send professional engineers to guide installation, debugging and training operators until customers are fully satisfied. Moreover, we can design and manufacture products according to customers’ specific needs.

if you have any questions ,please let me know.


Which payment term can we accept ?

1 Normally we can work on T/T term or L/C.
2 On T/T term , 30% down payment is required in advance,and 70% balance shall be settled before shipment.
3 On L/C term,a 100% irrevocable L/C without soft clauses can be accepted. Please seek the advice from the individual sales manager whom you work with .

Which incoterms 2010 terms can we work?
Ruisheng company is a professional and sophisticated international supplier,can handle all INCOTERMS 2010 terms,and we normally work on EXW, FOB ,CIF

Delivery time
Normally,our delivery time is 45 days after we rececive the deposit. If the order is big ,we need to extend  the delivery time. 

What logistics ways we can work for shipment?
We can ship construction machinery by various transportation tools .
normally, we will go by sea ,to mian continents ,for light spare parts in urgent demand ,we can ship it by international courier service.such as DHL,TNT,UPS or FedEx.

Warranty time
we ensure one year warranty, life-long service and provides technical support free of charge within or after warranty.within the warranty period, we provide repaire service for free. after the warranty period , we only charge cost of the required material


Contact US: Antonio

Tel:+0086-17755023213  WhatsApp: +0086-17755023213

Should u have any comments about our machine, please feel it contact by our

Talk to an expert

Submit your requirement and questions

contact us
  • Tel: Antonio yan: +0086-17755023213
  • Tel: Dave: +0086-18949769166
  • Fax: +86-0550-8092927
  • Antonio yan:
  • Dave:
  • Factory Address:East Wuyi Road,Mingguang Industrial Park,Anhui, China.
  • Office Address:Beiqing road,Chonggu town,Qingpu disctric,Shanghai,China.

Copyright © 2017 Anhui Mingguang City Rui Sheng Machinery Co.,Ltd All rights reserved.    Sitemap

Online Service