Lime Engineering project
 
 

Lime Engineering project

Introduction of Product:

The calcination principle of composite firing shaft kiln is: mix the solid fuel (coke or anthracite) with qualified stone evenly, use rotary discharging device equipped on kiln roof to discharge the mixture into the kiln, then under its own gravity the mixture proceeds through preheating area, calcining area, cooling area, and finally calcined into qualified finished lime product. In calcining area, the heat produced by the coke and anthracite of the preheated mixture and the kiln bottom blasted secondary air which has been used to preheat the cold lime has made the temperature to reach up to 950 ~ 1200 °C, thus to complete lime calcination. Due to the add of auxiliary combustion-supporting duct, the temperature at each point is uniform, which ensures the even temperature of the kiln body.

Lime kiln is a Thermal Equipment which is used for heating materials, like cement, copper Metallurgy, ferrous metallurgy, refractory material, chemical materials, paper making etc. 

We're here to help: Easy ways to get the answers you need.

GET PRICE
Share with :

Product Description:

Usage of lime in the lime plant/lime production line

Lime plant also can be named as lime production line, active lime processing, etc.

Lime in lime plant can be divided into ordinary lime and active lime according to the nature. The degree of activity is generally less than 200ml, which is mainly used for building and repairing roads. Active lime has a high degree with the value of 300-420ml as well as with advantage of high porosity, high reaction, and low consumption in process, controllable process, widely applied to the steel smelting, calcium carbide, chemical industry, desulfurization and etc.

Main Features:

 

The calcination principle of composite firing shaft kiln is: mix the solid fuel (coke or anthracite) with qualified stone evenly, use rotary discharging device equipped on kiln roof to discharge the mixture into the kiln, then under its own gravity the mixture proceeds through preheating area, calcining area, cooling area, and finally calcined into qualified finished lime product. In calcining area, the heat produced by the coke and anthracite of the preheated mixture and the kiln bottom blasted secondary air which has been used to preheat the cold lime has made the temperature to reach up to 950 ~ 1200 °C, thus to complete lime calcination. Due to the add of auxiliary combustion-supporting duct, the temperature at each point is uniform, which ensures the even temperature of the kiln body.

Lime kiln is a Thermal Equipment which is used for heating materials, like cement, copper Metallurgy, ferrous metallurgy, refractory material, chemical materials, paper making etc. 

Main technical of lime plant/lime production line:

The successful industry application of environment-friendly, energy-saving active lime stone with vertical preheated. Due to reduction of fuel consumption significantly and reducing exhaust emissions, coupled with the adoption of pulse-packs dust-catcher purify exhaust, not only makes production cost and the energy consumption greatly reduced, but also the calcinations process of emission standard, environmental condition is kept substantially.

Main advantage of lime plant/lime production line:

1. Good quality and high output, suitable for large-scale activity of lime production line and large-scale production.

2. Stable production, all the production with the negative pressure, air flow and higher security.

3. Simple structure, easy control and beneficial operation and maintenance.

4. Fine grade limestone can be calcined, full use of mine resources.

5. Low heat consumption per unit of product, installation in vertical kiln perheater which can take advantage of exhaust warm limestone, greatly reducing the fuel consumption.

6. Making full use of industrial waste gas as a fuel for lime burning (such as blast furnace exhaust gas, acetylene tail gas, charcoal blue exhaust, etc)

7. Kiln head adopts the design of vertical cooler integrating kiln head cover. The construction area is small, good sealing, effectively avoiding hot waste gas emissions unsystematically.

 

Quality Warranty & Service Promise:

 

Quality Warranty: 


One-year warranty period shall be provided to any client who buys our products and related accessories. The following promises are valid within the warranty period which is calculated from time or date when the client or consumer takes delivery of machine, opens case, inspects machine and receives with signature. We promise to guarantee free replacement within one month, and guarantee free repair within one year. 

 

Service Promise:

 

1) We shall make prompt response to any problem about the machine within 24 hours if you have.
2) We shall provide 6-day 8-hour services for all our clients and subscribers, and shall provide trouble-shooting solutions until the fault is completely eliminated.
3) If the machine is found any fault or problem, please do not hesitate to notify us the details about faults, caused reasons and status.

 

Contacts:Dave

 

Fax:+86-0550-8092927

 

Tel: +86-18949769166

 

E-mail:dave@rsmixer.com

Talk to an expert

Submit your requirement and questions

contact
contact us
  • Tel: Antonio yan: +0086-17755023213
  • Tel: Dave: +0086-18949769166
  • Fax: +86-0550-8092927
  • Antonio yan: info@rsmixer.com
  • Dave: Dave@rsmixer.com
  • Factory Address:East Wuyi Road,Mingguang Industrial Park,Anhui, China.
  • Office Address:Beiqing road,Chonggu town,Qingpu disctric,Shanghai,China.
Top

Copyright © 2017 Anhui Mingguang City Rui Sheng Machinery Co.,Ltd All rights reserved.    Sitemap

Online Service