Hot!!! professional burnt lime hydrator machine to make hydrated lime powder and paste

Hot!!! professional burnt lime hydrator machine to make hydrated lime powder and paste

Introduction of Product:

1) Automatic: it doesn't need many labors to operate the machines, and after the quick lime block enter the production line, just need one worker to look after the packing machine.
2) It has the advanced water and temperature controlling system, so it is very easy to inspect the working condition;
3) It has a powder classifier, so it can separate the fine powder easily to meet many different requirements, from 140mesh to 500 mesh. 
4) Low investment, and small location, this production can make perfect hydrated lime with very low cost, and it doesn't needs special workshop. 
5) It can make pure hydrated lime, very white. This production has a professional imputes separation device, no matter the burning ratio or brunt ratio, it can separate the imputes and output pure hydrated lime.
6). Compared with the old three-stage hydrator machine, it can output better and pure powder, and the worklife is longer

We're here to help: Easy ways to get the answers you need.

Share with :
Lime Hydrator Machine
This quick lime hydrator machine is a new design to replace the traditional method and old hydration plant. It is an automatic production line from quick lime block crushing to fine hydrated lime powder. We designed it to work with the lime kiln to make hydrated lime powder or paste for leather, paste, paint, chemical, phamacy etc.
Calcium Hydroxide Production Line/ Slaked Lime Production Line refers to calcinations of Quicklime into Calcium Oxide, and then slakes the selected Calcium Oxide and water based on the ratio of 1: (3 ~ 3.5). After generating Calcium Hydroxide-water mixture, then in the process of purification, separation, deslagging, centrifugal dehydration, drying under the temperature of 150~300℃, rescreening powders more than 120 mesh. Finally, we will get high quality calcium hydroxide whose chemical formula is CaCO3→CaO+CO2↑CaO+H2O→Ca (OH) 2.
Detailed Process:
Unslaked lime is transported by screw conveyor from hopper into first-grade lime slaker, after stirred slowly (non-abrasion) by stirring rods, unslaked lime is primarily slaked(note: according to capacity, divided into single, double and three axis), then gets into second-grade lime slaker(note: according to capacity, divided into single, double and three axis).
Slaked lime has chemical decomposition and has been decomposed into Ca(OH)2 (CaO+H2O=Ca(OH)2), then transported into classifier(mesh can be adjusted). After getting qualified slaked lime and removing impurity. Qualified slaked slime is transported into bucket elevator, then discharged into finished product hopper.
According to customer need, it can packed into tank truck or bags. The pollution of whole project is solved by pulse jet dust collector, collecting efficiency is 99.5%, which accords with environmental protection and noise criteria.
1. High quality and capacity;
2. High auto control;
3. Environment friendly;
4. Low power consumption;
5. Reasonable and experienced onsite service;
6. Long life cycle of wear parts.  
Contact US: Antonio
Tel:+0086-17755023213  WhatsApp: +0086-17755023213
Should u have any comments about our machine, please feel it contact by our
Talk to an expert

Submit your requirement and questions

contact us
  • Tel: Antonio yan: +0086-17755023213
  • Tel: Dave: +0086-18949769166
  • Fax: +86-0550-8092927
  • Antonio yan:
  • Dave:
  • Factory Address:East Wuyi Road,Mingguang Industrial Park,Anhui, China.
  • Office Address:Beiqing road,Chonggu town,Qingpu disctric,Shanghai,China.

Copyright © 2017 Anhui Mingguang City Rui Sheng Machinery Co.,Ltd All rights reserved.    Sitemap

Online Service