Full automatic professional quick lime plant to make hydrated lime powder and paste

Full automatic professional quick lime plant to make hydrated lime powder and paste

Introduction of Product:

Main Features
1) Automatic: it doesn't need many labors to operate the machines, and after the quick lime block enter the production line, just need one worker to look after the packing machine.
2) It has the advanced water and temperature controlling system, so it is very easy to inspect the working condition;
3) It has a powder classifier, so it can separate the fine powder easily to meet many different requirements, from 140mesh to 500 mesh. 
4) Low investment, and small location, this production can make perfect hydrated lime with very low cost, and it doesn't needs special workshop. 
5) It can make pure hydrated lime, very white. This production has a professional imputes separation device, no matter the burning ratio or brunt ratio, it can separate the imputes and output pure hydrated lime.
6). Compared with the old three-stage hydrator machine, it can output better and pure powder, and the worklife is longer

We're here to help: Easy ways to get the answers you need.

Share with :
Hydrated lime production line specifications
1.Hydrated lime production line
2.Capacity:80t/d~500t/d with rotary kiln/Vertical Kiln.
2.Fuel:Natural gas,heavy oil,diesel and etc
3.Raw material: Limestone
4.Product: Hydrated lime
5.More Safe For Workers
6.Air Flow and Higher Security
7.Suitable For Large-scale Plant
Qualified limestone stores in silos and be shipped through the pre-heater by the elevator into the silos which is on the top of the pre-heater. The pre-heater on the top of silos is consisted of top and bottom level meter controllers which control the feeding capacity. Then through the feed tube the limestone is distributed to the indoor compartment of the pre-heater.
Detailed Process:
Unslaked lime is transported by screw conveyor from hopper into first-grade lime slaker, after stirred slowly (non-abrasion) by stirring rods, unslaked lime is primarily slaked(note: according to capacity, divided into single, double and three axis), then gets into second-grade lime slaker(note: according to capacity, divided into single, double and three axis).
Slaked lime has chemical decomposition and has been decomposed into Ca(OH)2 (CaO+H2O=Ca(OH)2), then transported into classifier(mesh can be adjusted). After getting qualified slaked lime and removing impurity. Qualified slaked slime is transported into bucket elevator, then discharged into finished product hopper.
According to customer need, it can packed into tank truck or bags. The pollution of whole project is solved by pulse jet dust collector, collecting efficiency is 99.5%, which accords with environmental protection and noise criteria.
1. High quality and capacity;
2. High auto control;
3. Environment friendly;
4. Low power consumption;
5. Reasonable and experienced onsite service;
6. Long life cycle of wear parts.  
Contact US: Antonio
Tel:+0086-17755023213  WhatsApp: +0086-17755023213
Should u have any comments about our machine, please feel it contact by our email:info@rsmixer.com
Talk to an expert

Submit your requirement and questions

contact us
  • Tel: Antonio yan: +0086-17755023213
  • Tel: Dave: +0086-18949769166
  • Fax: +86-0550-8092927
  • Antonio yan: info@rsmixer.com
  • Dave: Dave@rsmixer.com
  • Factory Address:East Wuyi Road,Mingguang Industrial Park,Anhui, China.
  • Office Address:Beiqing road,Chonggu town,Qingpu disctric,Shanghai,China.

Copyright © 2017 Anhui Mingguang City Rui Sheng Machinery Co.,Ltd All rights reserved.    Sitemap

Online Service