Double screw concial mixer,twin screw cone mixer machine
 
 

Double screw concial mixer,twin screw cone mixer machine

Introduction of Product:

Features  of  mixing machine
1. Horizontal tank body, covers small area
2. Bearing is on both ends of the mixer, the material is not easy to enter, repair rate is low.
3. Gear box drive the auger shaft, simple maintenance ,high efficiency,save both  time and labour.
4. U- Shape tank bottom, easy operate, stir uniformly,  no dead angle, better for material discharge and cleaning.
5. Screw conveyor feeds conveniently, inlet flushes with the ground, feeding saves energy and  convenient.
6. The machine can be designed to cool or heat the powder inside .
7. Under the bottom or the sides  of the tank , there is a flap dome valve (pneumatic control or manual control) of the center. The valve is arc design to make sure no material deposit and no dead angle when mixing .There is a lid and fence on the top of the tank, it seals the tank well, so that no powder will come out during mixing
The focus u care

We're here to help: Easy ways to get the answers you need.

GET PRICE download
Share with :

Introduction 

Twin-screw cone mixer is a new and efficient mixing equipment, especially for powder mixing. Widely use for Chemicals, pharmaceuticals, pesticides, fertilizers, dyes, metallurgy, mining, food, monosodium glutamate, feed and other industries. Suitable for solid - solid (powder and powder) mixing, solid - liquid (powder and liquid) mixing.

 

 

1. Mixing Method: Standard Twin-screw cone mixer has two stirring spirals. According to the requirements for production, you can choose single spiral (one long spiral), double spirals (a long and a short asymmetrical spirals) and three spirals (two short and one long symmetrical spirals).

 

2. Cooling and Heating System: Can equip with outer jacket for heating or cooling. Usally use water for cooling, steam/ thermal oil/ electric for heating.

 

3. Liquid-adding Mixing: Install liquid jet pipeline in the intermediate shaft of the mixer, connect the atomizing nozzle, which can adding liquid into the mixer; By selecting a specific material, you can add the acid and alkaline liquid material into the powder for mixing.

 


Technical parameters

Model                                                 SHJ-200        SHJ-500           SHJ-1000
Total volume(m³)                                    0.2                  0.5                       1
Load factor?kg ?                                0.6                  0.6                    0.6
Maximum charge weight (kg)               95                  190                    380
Loose density                                       -0.8                 -0.8                    -0.8
Material granularity (mesh)               20-250          20-250                20-250
Power (kw)                                             2.2                  2.2                       4
Mix time (min)                                       6-10                6-10                   8-10
Dimensions (mm)                         Φ900×1905    Φ1160*2215       Φ1450*2820
Weight (kg)                                            500                 600                    1300
 
 





Working principal

1, the double helix of the material upward rapidly spinning two strands forming asymmetric along the tube wall and up and down the middle of the stud stream;
2, the rotating arm driven by orbital motion screw the spiral outer material varying degrees envelope into the butterfly body of the column, part of the material is raised lead position, and another portion of the material thrown out the studs, so as to achieve full circumferential orientation spreading material ;
3, has been elevated to the upper portion of the shares of two asymmetric materials converge again in the middle pocket, two strands merge into a downward stream flow, supplemented with a hole at the bottom of the material, forming a non-symmetrical cycle, since the composite motion, so that the material obtained in a relatively short period of time mixing precision.



application:
It is suitable for chemical industry,pharmaceutical industry,pesticide,dyestuff,petroleum industry,metallurgical industry,construction material and etc.Such as in the mixing,reaction,drying,cooling of power(soild-soild),power and liquid(soild-liquid),liquid and liquid(liquid-liquid).





 



 Q: Can you send the formula for the products we want to make?

A: Our machines can be used for many kinds of product making, such as Resin, Paint, Adhesive, Cosmetic, Food, Chemicals. There are many kinds of these products, so it's impossible for us to know all the formulas and technologies. We can assist you to find the raw material list you need, and after you place order with us, we can help you to find formula and technology, there will be engineers to teach you how to make the product, and the cost will be on your account.

 

Q: Do you have machines in stock?

A: Yes, but just the small-scale machines. Machines are different with other products, most of the large-scale machines are designed according to our customers' requirements, different customers have different production requirements, so the technical parameter is different for most machines. On the other hands, most of the our machines will cover a large area, so once the machines are finished, we will effect shipment after QC.

 

Q: Can you send the detailed drawings of the machine to us before we place order?

A: We can send you a draft drawing of the machines, and after you place order and pay the deposit, our engineer will design the specific technical parameters fo you and send you the detailed drawings. Once you confirm without questions, we will put it into production.

 

Q: Why does it take at least 20 days to finish the machine?

A: Once receipt the deposit from you, we will design the drawings and make out the list of the materials and accessories for the production. Once the drawings are finished, our workers will start the production, from welding, polishing, assembling, debugging, detection and so on. After finish, they need time to check the machines, if found any possible defect parts, they will return to the production until every part is 100% approved.

 

Q: Can we pay the balance after we receive the machines and test without problems?

A: It's unnessary to worry about the quality of our machines, we are confident in that. After the machine is finished, we can install and test the machine for you (if you can not come to our factory, we can record a vedio and send to you). Only after you check without problems, we will effect shipment. 

 

Q: If you price is higher than the suppliers for the products that are not made by you?

A: We can provide the whole production lines, which include many facilities and accessories(like Oil furnace, steam boiler, etc). It's impossible for us to make everyone of them, because we just make the main machines. However, based on our great reputation in the business, and also considering our huge sourcing quantity by collecting the orders from domestic and foreign customers, and our strong cash flow to pay the suppliers in advance. We can get the best offer from the suppliers. So after adding an reasonable profit for the outsourcing facilities and accessories (like Oil furnace, steam boiler, etc), we still can offer a very competitive price similar to our suppliers, or even lower in some case.

 

Company profile:





Anhui Rui Sheng Machinery Company is a machinery manufacturer, quality products, affordable prices, superb technology, scientific management and professional spirit, is committed to provide you with a more reasonable package solution. Equipment involved in building materials, chemicals, pharmaceuticals and other industries. Ordinary, stainless steel powder, liquid, paste and other equipment; Main products: glass beads blenders, thermal insulation equipment, insulation mortar production line, insulation mortar mixers, blenders lacquer, glass beads one-component mixer , dry mortar mixer, dry mortar mixer, screw conveyors, packaging machines and other professional equipment more than 20 varieties of production and development.

Our purpose: the contract and keep credibility, the user first, equality and mutual benefit, and sincerely hope that more Chinese and foreign customers and our plant.

 

if you want to know more about our product , please let me know.

  

 Contact US: Antonio


Tel:+0086-17755023213  WhatsApp: +0086-17755023213

Skype:info@rsmixer.com

Email:info@rsmixer.com

Should u have any comments about our machine, please feel it contact by our email:info@rsmixer.com

  
  

Talk to an expert

Submit your requirement and questions

contact
contact us
Top

Copyright © 2017 Anhui Mingguang City Rui Sheng Machinery Co.,Ltd All rights reserved.    Sitemap

Online Service